Ford Transit Custom V710 Scopema RIB Seat Swivel Base (2024 on)

Scopema produce an excellent range of high quality ULTRA LOW RIB seat swivels, we often use them in conversions we do ourselves and the fit and work really well. Scopema RIB swivels are constructed using tough coated mild steel which is CNC formed to give rigid support to the seat whilst travelling and whilst relaxing.

The swivel is operated using a single pull lever at the front of the seat and once pulled the seat can be easily rotated a full 180 degrees, depending of course on how much room you have around the seat. The only locked position is straight ahead so once swivelled you can use the seat at any angle you like.

This is a ULTRA LOW swivel, but as with all swivels, the actual size of the swivel does take up some room so it will add about 21mm to the height of the seat.

These particular swivels will fit all New Transit Custom V710 models with single seats from 2024 to present day and can be fitted on the driver and passenger side, just choose which when ordering. Scopema swivels are crash tested and have CE approval.

Supplied with a fitting kit.

NOTE: If you have a double passenger seat in your van then the driver seat will not rotate unless you fit a swivel plate below the double passenger seat as well.

For seats fitted with height adjustment, you will find that you probably need to raise the seat height to allow it to rotate without the plastic trim around the base fowling on anything. On certain models you will need to trim the plastic surround.

NOTE: This swivel fits between the seat runners and original seat base, (the rear outer ends of the runners can be trimmed or protection added to avoid any damage to the door trim while rotating the seat if this is a concern).