CBE Water Tank Probe PC110/180

Fresh water tank probe for use with the CBE PC100/PC110 and PC180 control panels.  Available in various lengths to suit your tank depth.

The 4-pin connector block connects to a matching socket on the wiring harness provided with the PC110 and PC180 control planel kits. 

Supplied with gasket and mounting nut for fitting to a 60mm diameter hole in your water tank.

If required, these probes can easily be cut down to suit different tank depths as follows:

• Shortest probe - Do NOT cut (this detects a full tank)
• Mid length probe - should be approximatley 1/3 of your tank depth.
• Two longest probes - both should be approximatley 2/3 of your tank depth.

Not suitable for use with other CBE control panels.